NSN 5315-00-811-1265 · NIIN 008111265 · FSC 5315
NO DASHES 5315008111265
In Stock
PIN,STRAIGHT,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQPJ | PIN CHAMFER ANGLE | DEGREES MINIMUM 14.5 AND DEGREES MAXIMUM 15.5 |
| FEAT | SPECIAL FEATURES | THE SHANK END OF PIN MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR |
| HGTH | HEIGHT | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.062 |
| MATT | MATERIAL | OVERALL STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.091 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.5 AND ROCKWELL C MAXIMUM 32.0 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| AASK | HEAD STYLE | |
| AAZP | CHAMFER LENGTH | INCHES MAXIMUM 0.062 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.124 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 0.585 AND INCHES MAXIMUM 0.605 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 6300 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6050 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 2 |
Supersedes
This item replaces cancelled NIINs 002351155 · 008471920. An older drawing citing one of those numbers resolves here.