NSN 5320-00-071-3252 · NIIN 000713252 · FSC 5320
NO DASHES 5320000713252
In Stock
RIVET,BLIND
Rivets
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SLEEVE FED SPEC 1ST MATERIAL RESPONSE QQ-S-763 OR ASSN STD 1ST MATERIAL RESPONSE A-S 5639 OR ASSN STD 2ND MATERIAL RESPONSE AST- A582 OR ASSN STD 3RD MATERIAL RESPONSE A-S 5641 |
| AAZF | SHANK STYLE | |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625,TY 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SLEEVE FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 2,CL2 AND FED SPEC 2ND TREATMENT RESPONSE QQ--35 |
| CQFM | HARDNESS RATING | BOLT ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | BOLT STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.079 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.332 AND INCHES MAXIMUM 0.346 |
| SFTT | SURFACE TREATMENT | SLEEVE CADMIUM AND CHROMATE AND PASSIVATE |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.200 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 9 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BOLT FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| MATT | MATERIAL | NUT ALUMINUM ALLOY 7075 |
| MATT | MATERIAL | SLEEVE STEEL COMP 304 OR STEEL COMP 303 OR STEEL COMP 303F |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BOLT MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.371 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | BOLT CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | NUT ANODIZE |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.157 AND INCHES MAXIMUM 0.219 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1674+3+3 | 80205 |
| NAS1675 | 80205 |
| NAS1674-3L3 | 80205 |
| NAS1674-3K3 | 80205 |
| SSHFA200-3 | 92541 |
| SSHFA200-3 | 98524 |
| SSHFA200-3 | C4293 |
Supersedes
This item replaces cancelled NIIN 005501401. An older drawing citing one of those numbers resolves here.