NSN 5320-00-205-7776 · NIIN 002057776 · FSC 5320
NO DASHES 5320002057776
In Stock
PIN-RIVET
Rivets
Technical characteristics
9 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.315 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| MATT | MATERIAL | OVERALL STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4037 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 6TH MATERIAL RESPONSE -IL-S-5000 OR ASSN STD 7TH MATERIAL RESPONSE A-S 6300 OR MIL SPEC 8TH MATERIAL RESPONSE -IL-S-6758 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.312 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.190 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1054-6-5 | 5M696 |
| HS52PB6-5 | 73197 |
| HS11-6-5 | 73197 |
| HS48PB6-5 | 73197 |
| NAS1054-6-5 | 80205 |
| NAS529-6-5 | 80205 |
| BACR15AY6-5 | 81205 |
| HS52PB6-5 | F0553 |
| HS52PB6-5 | C4293 |
| HS52PB6-5 | L4528 |
| HS52PB6-5 | R1120 |
Supersedes
This item replaces cancelled NIINs 000383250 · 005842134 · 006558167 · 012176090. An older drawing citing one of those numbers resolves here.