NSN 5320-00-225-0506 · NIIN 002250506 · FSC 5320
NO DASHES 5320002250506
In Stock
COLLAR,PIN-RIVET
Rivets
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 3 |
| ABCJ | COLLAR INSIDE DIAMETER | INCHES NOMINAL 0.255 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CWBJ | COLLAR STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 303SE |
| ABAJ | LUBRICATION | GREASE FILM |
| ABAB | COLLAR OVERALL HEIGHT | INCHES MINIMUM 0.432 AND INCHES MAXIMUM 0.452 |
| ABAA | COLLAR OUTSIDE DIAMETER | INCHES MINIMUM 0.355 AND INCHES MAXIMUM 0.365 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3B |
Cross-references
17 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL75-6AW | 1L382 |
| 1213AS628-2 | 30003 |
| HL75-6AW | 2G586 |
| HL75-6AW | 56878 |
| HL75-6AW | 60516 |
| HL75-6AW | 73197 |
| 5320PL1811088 | 9009H |
| HS5580-6 | 8V613 |
| HL75-6AW | 92215 |
| 30-139-6 | 97499 |
| HL75-6AW | C4293 |
| HL75-6AW | R1120 |
| HL75-6AW | L4528 |
| HS5580-6 | 02731 |
| HL75-6AW | 06950 |
| HL75-6AW | 06725 |
| HL75-6AW | 17446 |
Supersedes
This item replaces cancelled NIIN 006114489. An older drawing citing one of those numbers resolves here.