NSN 5320-00-237-8122 · NIIN 002378122 · FSC 5320
NO DASHES 5320002378122
In Stock
PIN-RIVET
Rivets
Application: WSD: HELICOPTER, MH-53E; F4S AIRCRAFT; HELICOPTER, COBRA/ATTACK, AH-1J; HELICOPTER, ADVANCE ATTACK, AH-1W; HELICOPTER, CH-53A/D/E; HELICOPTER, SOF/HH-53H PAVE LOW
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.415 AND INCHES MAXIMUM 0.440 |
| AGAV | END ITEM IDENTIFICATION | WSD: HELICOPTER, MH-53E; F4S AIRCRAFT; HELICOPTER, COBRA/ATTACK, AH-1J; HELICOPTER, ADVANCE ATTACK, AH-1W; HELICOPTER, CH-53A/D/E; HELICOPTER, SOF/HH-53H PAVE LOW |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AAJD | THREAD CLASS | 3A |
| AAZF | SHANK STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.077 AND INCHES MAXIMUM 0.090 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.097 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.447 AND INCHES MAXIMUM 1.467 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MAXIMUM 1.067 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL20PB8-17 | 56878 |
| HL20PB-8-17 | 60516 |
| HL20PB-8-17 | 73197 |
| BACB30MB8-17 | 81205 |
| HL20PB8-17 | 92215 |
| 100-048-8-17 | 97499 |
| HL20PB-8-17 | C4293 |
| HL200PB8-17 | 06725 |
| HL200PB8-17 | 06516 |
| HL200PB8-17 | 0ZC92 |
| HL20PB8-17 | 17446 |
Supersedes
This item replaces cancelled NIIN 008392155. An older drawing citing one of those numbers resolves here.