NSN 5320-00-377-1190 · NIIN 003771190 · FSC 5320
NO DASHES 5320003771190
In Stock
PIN-RIVET
Rivets
Application: W/S: AIRCRAFT, STARLIFTER C-141; HELICOPTER, HH-53H PAVE LOW; HELICOPTER, SUPER JOLLY H-53; AIRCRAFT, ORION P-3; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130)
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.077 AND INCHES MAXIMUM 0.090 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0947 AND INCHES MAXIMUM 0.0967 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.2641 AND INCHES MAXIMUM 0.2651 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.415 AND INCHES MAXIMUM 0.440 |
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED CETYL ALCOHOL |
| AGAV | END ITEM IDENTIFICATION | W/S: AIRCRAFT, STARLIFTER C-141; HELICOPTER, HH-53H PAVE LOW; HELICOPTER, SUPER JOLLY H-53; AIRCRAFT, ORION P-3; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130) |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MAXIMUM 0.567 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.947 AND INCHES MAXIMUM 0.967 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6049 |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 10490 |
Cross-references
27 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30MC8-9 | 1RC86 |
| HL64-8-9 | 56878 |
| HL64PB8-9 | 56878 |
| HL64-8-9 | 56876 |
| BACB30MC8-9 | 56878 |
| BACB30MC8-9 | 60516 |
| HL64PB8-9 | 60516 |
| HL64-8-9 | 60516 |
| HL1052PB-8-9 | 73197 |
| HL64PB-8-9 | 73197 |
| HL64-8-9 | 73197 |
| HL64-8-9 | 80539 |
| BACB30MC8-9 | 81205 |
| HL64-8-9 | 92215 |
| HL64PB8-9 | 92215 |
| HL64-8-9 | 97928 |
| HL64-8-9 | L4528 |
| HL64PB-8-9 | L4528 |
| HL1052PB-8-9 | L4528 |
| HL64-8-9 | R1120 |
| HL64PB8-9 | 06725 |
| AIC-L-806X8-9 | 06725 |
| HL64PB8-9 | 06950 |
| BACB30MC8-9 | 06950 |
| HL64-8-9 | 06950 |
| HL64-8-9 | 17446 |
| HL64PB8-9 | 17446 |
Supersedes
This item replaces cancelled NIIN 012174674. An older drawing citing one of those numbers resolves here.