NSN 5320-00-616-5644 · NIIN 006165644 · FSC 5320
NO DASHES 5320006165644
In Stock
PIN-RIVET
Rivets
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.126 AND INCHES MAXIMUM 0.188 |
| MATT | MATERIAL | OVERALL STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4037 OR STEEL COMP 4130 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.179 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 6TH MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 7TH MATERIAL RESPONSE -IL-S-8695 OR MIL SPEC 8TH MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.125 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS525-4-3 | 3M7A1 |
| HS51PB4-3 | 56878 |
| HS47PB4-3 | 73197 |
| HS47-4-3 | 73197 |
| HS51PB4-3 | 73197 |
| NAS525-4-3 | 80205 |
| NAS1055-4-3 | 80205 |
| HS51PB4-3 | 92215 |
| HS51PB4-3 | 97928 |
| HS51PB4-3 | C4293 |
| HS51PB4-3 | L4528 |
| HS51PB4-3 | R1120 |
| HS51PB4-3 | 17446 |
Supersedes
This item replaces cancelled NIINs 000581745 · 012184937. An older drawing citing one of those numbers resolves here.