PIN-RIVET
Rivets
Application: W/S:HELICOPTER, ADVANCE ATTACK, AH-1W; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; HELICOPTER, CARRIER BASED ASW, SH-60F; HELICOPTER, HH-53H PAVE LOW; HELICOPTER, SEARCH AND RESCUE, HH-60H; ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); HELICOPTER, MH-53E; AIRCRAFT, C-2A (REPROCURED)
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MAXIMUM 0.193 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| AGAV | END ITEM IDENTIFICATION | W/S:HELICOPTER, ADVANCE ATTACK, AH-1W; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; HELICOPTER, CARRIER BASED ASW, SH-60F; HELICOPTER, HH-53H PAVE LOW; HELICOPTER, SEARCH AND RESCUE, HH-60H; ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); HELICOPTER, MH-53E; AIRCRAFT, C-2A (REPROCURED) |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.190 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.503 AND INCHES MAXIMUM 0.523 |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.079 AND INCHES MAXIMUM 0.081 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| FEAT | SPECIAL FEATURES | A34 FLAT CHAMFER |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
Cross-references
25 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL1050PB6-3 | 1RC86 |
| HL1050PB6-3 | 56878 |
| HL20PB-6-3 | 56878 |
| HL20PB-6-3 | 60516 |
| HL20PB-6-3 | 5M902 |
| HL1050PB6-3 | 60516 |
| HL1050PB6-3 | 73197 |
| HL20PB6-3 | 73197 |
| BACB30MB6-3 | 77272 |
| BACB30MB6-3 | 81205 |
| 5320PL2220351 | 9009H |
| HS5603-6-3 | 8V613 |
| HL20PB-6-3 | 92215 |
| HL20PB-6-3 | 97928 |
| HL20PB-6-3 | A0126 |
| HL20PB-6-3 | A0311 |
| HL20PB-6-3 | R1120 |
| HL1050PB6-3 | K0668 |
| HL1050PB6-3 | L4528 |
| HS5603-6-3 | 02731 |
| HL20PB-6-3 | 06725 |
| HL1050PB6-3 | 06950 |
| HL20PB-6-3 | 06950 |
| HL1050PB6-3 | 06725 |
| HL1050PB6-3 | 17446 |
Supersedes
This item replaces cancelled NIINs 005244185 · 007310382 · 010644457. An older drawing citing one of those numbers resolves here.