NSN 5320-00-797-2638 · NIIN 007972638 · FSC 5320
NO DASHES 5320007972638
In Stock
PIN-RIVET
Rivets
Application: W/S: AIRCRAFT, TOMCAT F-14; AIRCRAFT, THUNDERBOLT II, A-10; AIRCRAFT, HX UNIQUE; AIRCRAFT, STARLIFTER C-141; AIRCRAFT, PHANTOM F-4; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, HERCULES C-130; AIRCRAFT, HAWKEYE E-2C; AIRCRAFT, AWACS, E-3A; FMS-AIRCRAFT, HAWKEYE E-2C
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.072 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.474 |
| AGAV | END ITEM IDENTIFICATION | W/S: AIRCRAFT, TOMCAT F-14; AIRCRAFT, THUNDERBOLT II, A-10; AIRCRAFT, HX UNIQUE; AIRCRAFT, STARLIFTER C-141; AIRCRAFT, PHANTOM F-4; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, HERCULES C-130; AIRCRAFT, HAWKEYE E-2C; AIRCRAFT, AWACS, E-3A; FMS-AIRCRAFT, HAWKEYE E-2C |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.127 AND INCHES MAXIMUM 0.130 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.312 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MAXIMUM 0.562 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
Cross-references
20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30FN10-9 | 1RC86 |
| HL19PB-10-9 | 1RC86 |
| GB510B5-9 | 26512 |
| BACB30FN10-9 | 56878 |
| HL19PB-10-9 | 56878 |
| BACB30FN10-9 | 60516 |
| HL19PB-10-9 | 60516 |
| HL19PB-10-9 | 73197 |
| BACB30FN10-9 | 73197 |
| HL19PB-10-9 | 80539 |
| BACB30FN10-9 | 81205 |
| 202-17001-10-9 | 80378 |
| HL19PB-10-9 | 92215 |
| HL19PB-10-9 | C4293 |
| HL19PB-10-9 | L4528 |
| HL19PB-10-9 | K5673 |
| HL19PB-10-9 | 06725 |
| BACB30FN10-9 | 06725 |
| HL19PB-10-9 | 06950 |
| HL19PB-10-9 | 17446 |