PIN-RIVET
Rivets
Application: W/S:HELICOPTER, ELECTRONIC COUNTERMEASURES, EH-60A; FMS-AIRCRAFT, HAWKEYE E-2C; FMS-A7 AIRCRAFT; JOINT STARS TARGET RADAR SYSTEM; HELICOPTER, SEARCH AND RESCUE, HH-60H; HELICOPTER, CARRIER BASED ASW, SH-60F; AH-64 D LONGBOW; HELICOPTER, HH-53H PAVE LOW; ENGINE, AIRCRAFT, T56-A-7/15 (C-130B/E/H/N/P); AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130)
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.164 |
| FEAT | SPECIAL FEATURES | COLOR BRONZE |
| AAPC | IDENTIFICATION CODE COLOR | BRONZE |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAZF | SHANK STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGAV | END ITEM IDENTIFICATION | W/S:HELICOPTER, ELECTRONIC COUNTERMEASURES, EH-60A; FMS-AIRCRAFT, HAWKEYE E-2C; FMS-A7 AIRCRAFT; JOINT STARS TARGET RADAR SYSTEM; HELICOPTER, SEARCH AND RESCUE, HH-60H; HELICOPTER, CARRIER BASED ASW, SH-60F; AH-64 D LONGBOW; HELICOPTER, HH-53H PAVE LOW; ENGINE, AIRCRAFT, T56-A-7/15 (C-130B/E/H/N/P); AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130) |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AAJD | THREAD CLASS | 3A |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MAXIMUM 0.317 |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.614 AND INCHES MAXIMUM 0.634 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.037 AND INCHES MAXIMUM 0.047 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0801 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.1625 AND INCHES MAXIMUM 0.1635 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.242 AND INCHES MAXIMUM 0.262 |
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
Cross-references
19 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL18PB-5-5 | 1RC86 |
| GB511D08-5 | 26512 |
| HL18PB-5-5 | 56878 |
| HL18PB-5-5 | 60516 |
| HL18PB-5-5 | 5M902 |
| BACB30FM5-5 | 5R793 |
| HL18PB-5-5 | 65016 |
| HL18PB-5-5 | 73197 |
| BACB30FM5-5 | 81205 |
| HS5602-5-5 | 8V613 |
| HL18PB-5-5 | 92215 |
| 5320PL0810971 | 9009H |
| HL18PB-5-5 | 97928 |
| HL18PB-5-5 | C4293 |
| HL18PB-5-5 | R1120 |
| HS5602-5-5 | 02731 |
| HL18PB-5-5 | 06725 |
| HL18PB-5-5 | 06950 |
| HL18PB-5-5 | 17446 |
Supersedes
This item replaces cancelled NIINs 001365730 · 007281456 · 009071437. An older drawing citing one of those numbers resolves here.