PIN-RIVET
Rivets
Application: W/S:AIRCRAFT,C-2A (REPROCURED); ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); ENGINE, AIRCRAFT, T56-A-7/15 (C-130B/E/H/N/P); AIRCRAFT, B-2 BOMBER (ATB); HELICOPTER, HH-53H PAVE LOW; HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); HELICOPTER, SEARCH AND RESCUE, HH-60H; MISSILE, ALL-WEATHER ANTI-SHIP, HARPOON (AGM-84); HELICOPTER, CARRIER BASED ASW, SH-60F
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| AAZF | SHANK STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AGAV | END ITEM IDENTIFICATION | W/S:AIRCRAFT,C-2A (REPROCURED); ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); ENGINE, AIRCRAFT, T56-A-7/15 (C-130B/E/H/N/P); AIRCRAFT, B-2 BOMBER (ATB); HELICOPTER, HH-53H PAVE LOW; HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); HELICOPTER, SEARCH AND RESCUE, HH-60H; MISSILE, ALL-WEATHER ANTI-SHIP, HARPOON (AGM-84); HELICOPTER, CARRIER BASED ASW, SH-60F |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| FEAT | SPECIAL FEATURES | COLOR BRONZE |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 0.380 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.315 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| AAJD | THREAD CLASS | 3A |
| AAPC | IDENTIFICATION CODE COLOR | BRONZE |
Cross-references
24 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30FM6-6 | 1N757 |
| HL18PB-6-6 | 1RC36 |
| HL18PB-6-6 | 1RC86 |
| BACB30FM6-6 | 1V757 |
| GB511D3-6 | 26512 |
| 1213AS623-6-6 | 30003 |
| BACB30FM6-6 | 2N935 |
| HL18PB-6-6 | 56878 |
| HL18PB-6-6 | 60516 |
| HL18PB-6-6 | 73197 |
| HL18BP6-6 | 73197 |
| HL62PB-5-6 | 73197 |
| BACB30FM6-6 | 81205 |
| HL18PB-6-6 | 80539 |
| 5320PL0854294 | 9009H |
| HS5602-6-6 | 8V613 |
| HL18PB-6-6 | 92215 |
| HL18PB-6-6 | C4293 |
| HL18PB-6-6 | R1120 |
| HL18PB-6-6 | L4528 |
| HS5602-6-6 | 02731 |
| HL18PB-6-6 | 06725 |
| HL18PB-6-6 | 06950 |
| HL18PB-6-6 | 17446 |
Supersedes
This item replaces cancelled NIINs 004983601 · 007801238. An older drawing citing one of those numbers resolves here.