NSN 5320-00-959-7261 · NIIN 009597261 · FSC 5320
NO DASHES 5320009597261
In Stock
PIN-RIVET
Rivets
Application: W/S:FMS-AIRCRAFT, HAWKEYE E-2C; AIRCRAFT, STRATOFORTRESS B-52; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); HELICOPTER, MH-53E; FMS-A7 AIRCRAFT; AIRCRAFT, C-2A (REPROCURED); AIRCRAFT, HERCULES C-130; JOINT STARS TARGET RADAR SYSTEM
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZF | SHANK STYLE | |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.097 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AGAV | END ITEM IDENTIFICATION | W/S:FMS-AIRCRAFT, HAWKEYE E-2C; AIRCRAFT, STRATOFORTRESS B-52; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); HELICOPTER, MH-53E; FMS-A7 AIRCRAFT; AIRCRAFT, C-2A (REPROCURED); AIRCRAFT, HERCULES C-130; JOINT STARS TARGET RADAR SYSTEM |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.395 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MAXIMUM 0.567 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.947 AND INCHES MAXIMUM 0.967 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30FN8-9 | 1RC86 |
| GB510B4-9 | 26512 |
| HL19PB-8-9 | 56878 |
| HL19PB-8-9 | 60516 |
| HL19PB-8-9 | 73197 |
| BACB30FN8-9 | 81205 |
| HL19PB-8-9 | 80539 |
| HL19PB-8-9 | 92215 |
| HL19PB-8-9 | 97928 |
| HL19PB-8-9 | L4528 |
| HL19PB-8-9 | R1120 |
| HL19PB-8-9 | 06725 |
| HL19PB-8-9 | 06950 |
| HL19PB-8-9 | 17446 |
Supersedes
This item replaces cancelled NIINs 002238069 · 007801233. An older drawing citing one of those numbers resolves here.