NSN 5320-00-959-7303 · NIIN 009597303 · FSC 5320
NO DASHES 5320009597303
In Stock
PIN-RIVET
Rivets
Application: W/S: AIRCRAFT, STARLIFTER C-141; AIRCRAFT, HX UNIQUE; HELICOPTER, HX UNIQUE; FMS-A7 AIRCRAFT; JOINT STARS TARGET RADAR SYSTEM; AIRCRAFT, F-111; AIRCRAFT, GALAXY C-5; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, C-2A (REPROCURED); ENGINE, AIRCRAFT, T56-A-7/15 (C-130B/E/H/N/P)
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | W/S: AIRCRAFT, STARLIFTER C-141; AIRCRAFT, HX UNIQUE; HELICOPTER, HX UNIQUE; FMS-A7 AIRCRAFT; JOINT STARS TARGET RADAR SYSTEM; AIRCRAFT, F-111; AIRCRAFT, GALAXY C-5; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, C-2A (REPROCURED); ENGINE, AIRCRAFT, T56-A-7/15 (C-130B/E/H/N/P) |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| AAZF | SHANK STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.2966 AND INCHES MAXIMUM 0.3016 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.807 AND INCHES MAXIMUM 0.817 |
| AASK | HEAD STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.127 AND INCHES MAXIMUM 1.147 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| AAJD | THREAD CLASS | 3A |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
Cross-references
20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB30FN6-13 | 1RC86 |
| HL19PB-6-13 | 1V757 |
| GB510B3-13 | 26512 |
| HL19PB-6-13 | 56878 |
| HL19PB-6-13 | 60516 |
| HL19PB-6-13 | 73197 |
| BACB30FN6-13 | 77272 |
| 202-17001-6-13 | 80378 |
| HL19PB-6-13 | 80539 |
| BACB30FN6-13 | 81205 |
| HL19PB-6-13 | 92215 |
| 5320PL1617703 | 9009H |
| HL19PB-6-13 | C4293 |
| HL19PB-6-13 | L4528 |
| HL19PB-6-13 | U6300 |
| HL19PB-6-13 | R1120 |
| HL19PB-6-13 | 05693 |
| HL19PB-6-13 | 06725 |
| HL19PB-6-13 | 06950 |
| HL19PB-6-13 | 17446 |
Supersedes
This item replaces cancelled NIINs 013759489 · 003406629 · 004989878 · 007971507. An older drawing citing one of those numbers resolves here.