NSN 5320-01-095-4674 · NIIN 010954674 · FSC 5320
NO DASHES 5320010954674
In Stock
PIN-RIVET
Rivets
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MAXIMUM 0.356 |
| ABAJ | LUBRICATION | DRY FILM AND CETYL ALCOHOL |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.313 AND INCHES MAXIMUM 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 108000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
17 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 4448S06-06P | 29666 |
| HLT915TB-6-6 | 56878 |
| HLT915LP-6-6 | 56878 |
| HLT915TB-6-6 | 73197 |
| HLT915LP-6-6 | 73197 |
| C9570-6-6P | 81755 |
| 5320PL1873044 | 9009H |
| HLT915TB-6-6 | 92215 |
| 5320PL1805625 | 9009H |
| 5320PL0745853 | 9009H |
| HLT915LP-6-6 | 92215 |
| HLT915TB-6-6 | 97928 |
| HLT915TB-6-6 | L4528 |
| HLT915LP-6-6 | 06950 |
| KS426S06-6P | 17446 |
| 4448S06-06P | 17446 |
| 4448S06-6P | 17446 |