NSN 5320-01-101-6110 · NIIN 011016110 · FSC 5320
NO DASHES 5320011016110
In Stock
PIN-RIVET
Rivets
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.823 AND INCHES MAXIMUM 0.843 |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0947 AND INCHES MAXIMUM 0.0967 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MAXIMUM 0.478 |
| ABAJ | LUBRICATION | DRY FILM AND CETYL ALCOHOL |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.438 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 108000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 4448S08-07P | 29666 |
| HLT915TB-8-7 | 56878 |
| HLT915TB-8-7 | 60516 |
| HLT915TB-8-7 | 73197 |
| C9570-8-7P | 81755 |
| 5320PL1805094 | 9009H |
| 5320PL0745828 | 9009H |
| HLT915TB-8-7 | 92215 |
| HLT915TB-8-7 | 97928 |
| HLT915TB-8-7 | L4528 |
| HLT915TB-8-7 | 06725 |
| HLT915TB-8-7 | 17446 |
| 4448S08-07P | 17446 |
| KS426208-7P | 17446 |