NSN 5320-01-133-1635 · NIIN 011331635 · FSC 5320
NO DASHES 5320011331635
In Stock
PIN-RIVET
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.760 AND INCHES MAXIMUM 0.780 |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0947 AND INCHES MAXIMUM 0.0967 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MAXIMUM 0.5066 |
| ABAJ | LUBRICATION | SOLID FILM AND CETYL ALCOHOL |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 0.380 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 210000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| FEAT | SPECIAL FEATURES | 6-32UNJC-3B THREAD SIZE ALONG THE LONGITUDINAL AXIS FROM THE HEAD END,0.120 IN. SLOT LENGTH,0.060 IN. SLOT WIDTH LOCATED ON SHANK NEAR HEAD |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HLT265TB-8-6-16 | 56878 |
| HLT265TB-8-6-16 | 60516 |
| HLT265TB-8-6-16 | 73197 |
| ST3M757C4-6-16 | 76301 |
| 3M757C4-6-16 | 76301 |
| HLT265TB-8-6-16 | 92215 |
| HLT265TB-8-6-16 | 97928 |
| 10111485 | A486G |
| HLT265TB-8-6-16 | L4528 |
| HLT265TB-8-6-16 | 17446 |