NSN 5320-01-164-7516 · NIIN 011647516 · FSC 5320
NO DASHES 5320011647516
In Stock
PIN-RIVET
Rivets
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.112 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3266 AND INCHES MAXIMUM 0.3276 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.472 AND INCHES MAXIMUM 0.502 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 0.755 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TYE 2 CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL64PB-10-12 | 1RC86 |
| HL64PB-10-12 | 56878 |
| HL64PB-10-12 | 60516 |
| HL64PB-10-12 | 73197 |
| BACB30MC10-12 | 81205 |
| HL64PB-10-12 | 92215 |
| HL64PB-10-12 | 97928 |
| HL64PB-10-12 | L4528 |
| HL64PB-10-12 | 06950 |
| AIC-L-806X10-12 | 06725 |
| HL64PB-10-12 | 17446 |