NSN 5320-01-514-2408 · NIIN 015142408 · FSC 5320
NO DASHES 5320015142408
In Stock
PIN-RIVET
Rivets
Application: F/A-18 HORNET
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.4689 AND INCHES MAXIMUM 0.4739 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP AND SOLID FILM |
| AGAV | END ITEM IDENTIFICATION | F/A-18 HORNET |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HLT311DL-10-8 | 73197 |
| HLT311DL-10-8 | L4528 |
| AIC-L-758V5-8 | 06725 |