NSN 5320-01-618-8086 · NIIN 016188086 · FSC 5320
NO DASHES 5320016188086
In Stock
PIN-RIVET
Rivets
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 5380 |
| CTTC | THREAD TOLERANCE CLASS | EXTERNAL 3A |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, RIVET, THREADED, PROTRUDING TENSION HEAD, HEX-POINT DRIVE |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.079 AND INCHES MAXIMUM 0.081 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.753 AND INCHES MAXIMUM 0.773 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.181 AND INCHES MAXIMUM 0.184 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.433 AND INCHES MAXIMUM 0.443 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6049 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6325 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6327 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6415 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6484 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416, TYE II, CLASS 2, |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL20PB-6-7 | 60516 |
| HS5603-6-7 | 8V613 |
| HS5603 | 8V613 |