NSN 5320-01-654-9441 · NIIN 016549441 · FSC 5320
NO DASHES 5320016549441
In Stock
PIN-RIVET
Rivets
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.4375 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.0930 AND INCHES MAXIMUM 0.1050 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.5375 AND INCHES MAXIMUM 1.5575 |
| AAZU | TIP DIAMETER | INCHES MINIMUM 0.4260 AND INCHES MAXIMUM 0.4310 |
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 90.0 AND DEGREES MAXIMUM 100.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,PROTRUDING,SHEAR HEAD,PH13-8MO CRES,HEX DRIVE |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1895 AND INCHES MAXIMUM 0.1930 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.4360 AND INCHES MAXIMUM 0.4370 |
| AAZF | SHANK STYLE | |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.0575 AND INCHES MAXIMUM 1.0675 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE ALU-INU- IG-ENTED COATING ER HI-SHEAR SEC 294 OR NATIONAL SPEC SINGLE TREATMENT RESPONSE NAS4006 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.6410 AND INCHES MAXIMUM 0.6760 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL SPEC SINGLE MATERIAL RESPONSE A-S5629,H13-8-O STAINLESS STEEL |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 97499-100-145 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HST644AP-14-17 | 56878 |
| WC644AP-14-17 | 60516 |
| HST644AP-14-17 | 73197 |
| HST644AP-14-17 | 80539 |
| 100-145-14-17 | 97499 |
| HST644AP-14-17 | K5673 |
| HST644AP-14-17 | 06725 |
| VL644AP-14-17 | 06950 |
| 100-145-14-17 | 0ZC92 |
| VL644AP-14-17 | 17446 |