NSN 5320-01-672-5775 · NIIN 016725775 · FSC 5320
NO DASHES 5320016725775
In Stock
PIN-RIVET
Rivets
Application: F16 AIRCRAFT
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| AGAV | END ITEM IDENTIFICATION | F16 AIRCRAFT |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.177 AND INCHES MAXIMUM 1.192 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.070 |
| ABAJ | LUBRICATION | DRY FILM AND CETYL ALCOHOL |
| AAZF | SHANK STYLE | |
| FEAT | SPECIAL FEATURES | DRY FILM AND CETYL ALCOHOL LUBE PER BPS171 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3332 AND INCHES MAXIMUM 0.3547 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL SPEC SINGLE MATERIAL RESPONSE A-S 4928 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.558 AND INCHES MAXIMUM 1.583 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-TAPER SHANK,100 DEG HEAD TYPE,OVERSIZE |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.472 AND INCHES MAXIMUM 0.522 |
| AAZU | TIP DIAMETER | INCHES MINIMUM 0.3053 AND INCHES MAXIMUM 0.3105 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TLV110-5-19E | 27624 |
| TL110 | 27624 |
| TLV110-5-19E | 59563 |
| TLV110-5-19E | 80539 |
| TLV110-5-19E | 92215 |
| TLV110-5-19E | 17446 |