NSN 5320-01-682-0609 · NIIN 016820609 · FSC 5320
NO DASHES 5320016820609
In Stock
RIVET,BLIND
Rivets
Application: F16
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.3270 AND INCHES MAXIMUM 0.3272 |
| AGAV | END ITEM IDENTIFICATION | F16 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MECHANICAL LOCK NATIONAL STD 1ST MATERIAL RESPONSE A-S 5737 OR NATIONAL STD 2ND MATERIAL RESPONSE A-S 5690 |
| ABAJ | LUBRICATION | SOLID FILM |
| SFTT | SURFACE TREATMENT | SLEEVE PASSIVATE |
| SFTT | SURFACE TREATMENT | STEM PASSIVATE |
| SFTT | SURFACE TREATMENT | WASHER CADMIUM OR NICKEL |
| AAZF | SHANK STYLE | |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.916 |
| AASK | HEAD STYLE | |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.213 AND INCHES MAXIMUM 0.215 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SLEEVE NATIONAL STD SINGLE MATERIAL RESPONSE A-S 5737 |
| MATT | MATERIAL | MECHANICAL LOCK STEEL CORROSION RESISTING OR STEEL COMP 316 |
| MATT | MATERIAL | SLEEVE STEEL CORROSION RESISTING |
| MATT | MATERIAL | STEM STEEL CORROSION RESISTING |
| MATT | MATERIAL | WASHER STEEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | STEM FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | WASHER MIL SPEC 1ST TREATMENT RESPONSE -IL-F-8975 OR FED SPEC 2ND TREATMENT RESPONSE QQ-N-290 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MECHANICAL LOCK FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 98.0 AND DEGREES MAXIMUM 101.0 |
| SFTT | SURFACE TREATMENT | MECHANICAL LOCK PASSIVATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | STEM NATIONAL STD SINGLE MATERIAL RESPONSE A-S 5737 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SLEEVE FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1690 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.740 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C9512-06-9 | 80539 |
| C9512-06-9 | 81755 |
| C9512 | 81755 |
| C9512-06-9 | 0HDW7 |
| C9512-06-9 | 11815 |