NSN 5320-01-695-7303 · NIIN 016957303 · FSC 5320
NO DASHES 5320016957303
In Stock
PIN-RIVET
Rivets
Application: A10
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.620 AND INCHES MAXIMUM 0.630 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.078 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2416 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | 100 DEG FLUSH SHEAR HEAD H-11 STEEL ALLOY 132,000 PSI SHEAR MINIMUM 1/16 INCH GRIP VARIATION |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.160 AND INCHES MAXIMUM 1.180 |
| AASK | HEAD STYLE | |
| AGAV | END ITEM IDENTIFICATION | A10 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1582 AND INCHES MAXIMUM 0.1617 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3735 AND INCHES MAXIMUM 0.3745 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.5554 AND INCHES MAXIMUM 0.5604 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 132000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL115 | 73197 |
| HL115-12-10 | 73197 |