NSN 5320-01-718-1770 · NIIN 017181770 · FSC 5320
NO DASHES 5320017181770
In Stock
PIN-RIVET
Rivets
Application: F-15EX
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE II,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.1900 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PROTRUDING TENSION HEAD ALLOY STEEL 1/16 INCH GRIP VARIATION |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.4325 AND INCHES MAXIMUM 0.4425 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0781 AND INCHES MAXIMUM 0.0806 |
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.7525 AND INCHES MAXIMUM 0.7725 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| AAZF | SHANK STYLE | |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1680 AND INCHES MAXIMUM 0.1695 |