NSN 5320-01-724-9634 · NIIN 017249634 · FSC 5320
NO DASHES 5320017249634
In Stock
PIN-RIVET
Rivets
Application: T-45WING MOD
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.068 AND INCHES MAXIMUM 0.078 |
| AAZF | SHANK STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HI-LOK HI-TIGUE PIN 100 FLUSH SHEAR HEAD TITANIUM 1/16 GR |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S4967 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| AGAV | END ITEM IDENTIFICATION | T-45WING MOD |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.370 AND INCHES MAXIMUM 1.385 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF 6TH TREATMENT RESPONSE I-SHEAR SEC. 294 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.865 AND INCHES MAXIMUM 1.885 |
| AASK | HEAD STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.475 AND INCHES MAXIMUM 0.505 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HLT410 | 73197 |
| HLT410AP10-22 | 73197 |
| HLT410AP10-22 | 76301 |