NSN 5320-01-725-3417 · NIIN 017253417 · FSC 5320
NO DASHES 5320017253417
In Stock
PIN-RIVET
Rivets
Application: T-45WING MOD
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.5625 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.6975 AND INCHES MAXIMUM 1.7175 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| AGAV | END ITEM IDENTIFICATION | T-45WING MOD |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HI-LOK HI-TIGUE PIN PROTRUDING SHEAR HEAD TITANIUM 1/16 GRIP VARIATION |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S4967 |
| AAZF | SHANK STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.829 AND INCHES MAXIMUM 0.864 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.112 AND INCHES MAXIMUM 0.127 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.2520 AND INCHES MAXIMUM 0.2555 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.5610 AND INCHES MAXIMUM 0.5619 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF 6TH TREATMENT RESPONSE I-SHEAR SEC. 294 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.9325 AND INCHES MAXIMUM 0.9475 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HLT410AP18-15 | 73197 |
| HLT410 | 73197 |