NSN 5320-01-727-1398 · NIIN 017271398 · FSC 5320
NO DASHES 5320017271398
In Stock
PIN-RIVET
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,PROTRUDING TENSION HEAD ALLOY STEEL 1/16 GRIP VARIATION,1/64 OVERSIZE |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.995 AND INCHES MAXIMUM 2.005 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2016 AND INCHES MAXIMUM 0.2026 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S6415 OR ASSN STD 2ND MATERIAL RESPONSE A-S6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAZF | SHANK STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.1900 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 90.0 AND DEGREES MAXIMUM 100.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.315 AND INCHES MAXIMUM 2.335 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--416,TYE II,CLASS 2 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL64PB-6-32 | 73197 |
| HL64 | 73197 |