NSN 5320-01-729-3630 · NIIN 017293630 · FSC 5320
NO DASHES 5320017293630
In Stock
PIN-RIVET
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.925 AND INCHES MAXIMUM 0.945 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0947 AND INCHES MAXIMUM 0.0967 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2797 AND INCHES MAXIMUM 0.2807 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.4210 AND INCHES MAXIMUM 0.4260 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE 6AL-4V ER A-S4928 OR A-S4967 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE HI-KOTE 1 ALU-INU- IG-ENTED COATING ER HI-SHEAR SEC 294 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.510 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJD | THREAD CLASS | 3A |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.0589 AND INCHES MAXIMUM 0.0610 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HI-LOK HI-TIGUE PIN 100 DEGREE FLUSH SHEAR HEAD TITANIUM 1/16 GRIP VARIATION, 1/32 OVERSIZE |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.2500 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HLT209 | 73197 |
| HLT209AP8-8 | 73197 |