NSN 5320-01-729-4726 · NIIN 017294726 · FSC 5320
NO DASHES 5320017294726
In Stock
PIN-RIVET
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE 6AL-4V ER A-S4928 OR A-S4967 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.520 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.093 AND INCHES MAXIMUM 0.105 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1895 AND INCHES MAXIMUM 0.1930 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.641 AND INCHES MAXIMUM 0.676 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.885 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HI-LOK HI-TIGUE PIN PROTRUDING SHEAR HEAD TITANIUM 1/16 GRIP VARIATION |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4374 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.4375 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE HI-KOTE 1 ALU-INU- IG-ENTED COATING ER HI-SHEAR SEC 294 |
| AAJD | THREAD CLASS | 3A |
| AAZF | SHANK STYLE |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HLT410 | 73197 |
| HLT410AP14-14 | 73197 |