NSN 5320-01-734-9304 · NIIN 017349304 · FSC 5320
NO DASHES 5320017349304
In Stock
PIN-RIVET
Rivets
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZG | HEAD MAJOR DIAMETER | OVERALL INCHES MINIMUM 0.597 AND INCHES MAXIMUM 0.604 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET, THREAD, TENSION, 100 DEGREES C'SUNK HEAD HEX POINT DRIVE, FOR SEALANT APPLICATION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629 H13-8-O |
| AASU | HEAD HEIGHT | OVERALL INCHES MINIMUM 0.1330 AND INCHES MAXIMUM 0.1350 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 210000 |
| AASB | FASTENER LENGTH | OVERALL INCHES MINIMUM 1.0525 AND INCHES MAXIMUM 1.0725 |
| AASK | HEAD STYLE | |
| AAZF | SHANK STYLE | |
| FEAT | SPECIAL FEATURES | INTERNAL TAPPED HOLE SHALL BE 0.1380-32 UNJC-3B, EXCEPT PITCH DIAMETER SHALL BE 0.1204 -0.1177; DISTANCE FROM HEAD TO INJECTION PORT IS 0.30 INCHES |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAZE | SHANK DIAMETER | OVERALL INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE TREATMENT RESPONSE A-S2700, -ETHOD 1 |
| ABAJ | LUBRICATION | OVERALL SOLID FILM AND DRY FILM AND CETYL ALCOHOL |
| ANEE | GRIP LENGTH | OVERALL INCHES MINIMUM 0.5575 AND INCHES MAXIMUM 0.5625 |
| AAJD | THREAD CLASS | 3A |
Cross-references
20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M757D5-9-30 | 1VSL7 |
| HLT941TB10-9-30 | 56878 |
| HLT941DL-10-9-30 | 56878 |
| HLT941DL-10-9-30 | 60516 |
| HLT941TB10-9-30 | 60516 |
| 3M757D5-9-30 | 58998 |
| WC3941DL-10-9-30 | 60516 |
| HLT941DL-10-9-30 | 73197 |
| HLT941TB10-9-30 | 73197 |
| 3M757 | 76301 |
| 3M757D5-9-30 | 76301 |
| HLT941TB10-9-30 | 80539 |
| HLT941DL-10-9-30 | 80539 |
| HLT941DL-10-9-30 | 92215 |
| HLT941TB10-9-30 | 92215 |
| HLT941TB10-9-30 | K5673 |
| HLT941DL-10-9-30 | K5673 |
| HLT941TB10-9-30 | 06950 |
| HLT941DL-10-9-30 | 06950 |
| HP6757D5-9-30 | 0ZC92 |