PIN-RIVET

Name: PIN-RIVET
Brand: Atlas Air Supply
SKU: 5320017355836
Availability: LimitedAvailability

Rivets

Technical characteristics

21 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAZE	SHANK DIAMETER	OVERALL INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120
AAZG	HEAD MAJOR DIAMETER	OVERALL INCHES MINIMUM 0.6287 AND INCHES MAXIMUM 0.6335
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASB	FASTENER LENGTH	OVERALL INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.635
AASK	HEAD STYLE
AASU	HEAD HEIGHT	OVERALL INCHES MINIMUM 0.1330 AND INCHES MAXIMUM 0.1350
ANEE	GRIP LENGTH	OVERALL INCHES MINIMUM 1.12 AND INCHES MAXIMUM 1.13
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
CMLP	THREAD QUANTITY PER INCH	24
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 210000
CQJX	NOMINAL THREAD SIZE	INCHES 0.3125
CRSQ	COUNTERSINK ANGLE	DEGREES NOMINAL 100.0
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S2700,-ETHOD 1
FEAT	SPECIAL FEATURES	"INTERNAL TAPPED HOLE SHALL BE 0.1380-32 UNJC-3B, EXCEPT PITCH DIAMETER SHALL BE 0.1204 -0.1177. THREAD CREST DISCONTINUITIES ARE PERMISSIBLE, HOWEVER THE INTERNAL THREAD SHALL BE CAPABLE OF SUPPORTING 500 LBS IN TENSION;DISTACE FROM HEAD TO INJECTION PORT IS 0.65
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629
AAZF	SHANK STYLE
MATT	MATERIAL	OVERALL STEEL COMP XM-13
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	"PIN-RIVET, THREAD, TENSION, 100 DEGREES C'SUNK HEAD HEX POINT DRIVE, FOR SEALANT APPLICATION
AATB	WIDTH BETWEEN FLATS	INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295

20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.