PIN-RIVET

Name: PIN-RIVET
Brand: Atlas Air Supply
SKU: 5320017356284
Availability: LimitedAvailability

Rivets

Technical characteristics

21 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	PIN-RIVET, THREAD, TENSION, 100 DEGREES C'SUNK HEAD HEX POINT DRIVE, FORSEALANT APPLICATION
AAJF	THREAD DIRECTION	RIGHT-HAND
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 210000
CQJX	NOMINAL THREAD SIZE	INCHES 0.3125
AAJD	THREAD CLASS	3A
AASB	FASTENER LENGTH	OVERALL INCHES MINIMUM 1.6775 AND INCHES MAXIMUM 1.6975
AASK	HEAD STYLE
AASU	HEAD HEIGHT	OVERALL INCHES MINIMUM 0.1330 AND INCHES MAXIMUM 0.1350
AATB	WIDTH BETWEEN FLATS	INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295
AAZE	SHANK DIAMETER	OVERALL INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120
AAZF	SHANK STYLE
AAZG	HEAD MAJOR DIAMETER	OVERALL INCHES MINIMUM 0.6287 AND INCHES MAXIMUM 0.6335
ANEE	GRIP LENGTH	OVERALL INCHES MINIMUM 1.1825 AND INCHES MAXIMUM 1.1925
CMLP	THREAD QUANTITY PER INCH	24
FEAT	SPECIAL FEATURES	INTERNAL TAPPED HOLE SHALL BE 0.1380-32 UNJC-3B, EXCEPT PITCH DIAMETER SHALL BE 0.1204 -0.1177. THREAD CREST DISCONTINUITIES ARE PERMISSIBLE, HOWEVER, THE INTERNAL THREAD SHALL BE CAPABLE OF SUPPORTING 500 LBS IN TENSION;DISTANCE FROM HEAD TO INJECTION PORT IS 0.72
CRSQ	COUNTERSINK ANGLE	DEGREES NOMINAL 100.0
MATT	MATERIAL	OVERALL STEEL COMP XM-13
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S2700,-ETHOD 1
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.