PIN-RIVET

Name: PIN-RIVET
Brand: Atlas Air Supply
SKU: 5320017356302
Availability: LimitedAvailability

Rivets

Technical characteristics

21 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AASU	HEAD HEIGHT	OVERALL INCHES MINIMUM 0.1330 AND INCHES MAXIMUM 0.1350
AASB	FASTENER LENGTH	OVERALL INCHES MINIMUM 1.6775 AND INCHES MAXIMUM 1.6975
ANEE	GRIP LENGTH	OVERALL INCHES MINIMUM 1.1825 AND INCHES MAXIMUM 1.1925
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
AASK	HEAD STYLE
CRSQ	COUNTERSINK ANGLE	DEGREES NOMINAL 100.0
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	PIN-RIVET, THREAD, TENSION, 100 DEGREES C'SUNK HEAD HEX POINT DRIVE, FORSEALANT APPLICATION
FEAT	SPECIAL FEATURES	INTERNAL TAPPED HOLE SHALL BE 0.1380-32 UNJC-3B, EXCEPT PITCH DIAMETER SHALL BE 0.1204 -0.1177. THREAD CREST DISCONTINUITIES ARE PERMISSIBLE, HOWEVER, THE INTERNAL THREAD SHALL BE CAPABLE OF SUPPORTING 500 LBS IN TENSION;DISTANCE FROM HEAD TOINJECTION PORT IS 0.65
MATT	MATERIAL	OVERALL STEEL COMP XM-13
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629
SFTT	SURFACE TREATMENT	OVERALL PASSIVATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S2700,-ETHOD 1
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 210000
CQJX	NOMINAL THREAD SIZE	INCHES 0.3125
AATB	WIDTH BETWEEN FLATS	INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295
AAZE	SHANK DIAMETER	OVERALL INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120
AAZF	SHANK STYLE
AAZG	HEAD MAJOR DIAMETER	OVERALL INCHES MINIMUM 0.6287 AND INCHES MAXIMUM 0.6335
AAJD	THREAD CLASS	3A
CMLP	THREAD QUANTITY PER INCH	24
AAJF	THREAD DIRECTION	RIGHT-HAND

21 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.