NSN 5325-00-565-5818 · NIIN 005655818 · FSC 5325
NO DASHES 5325005655818
In Stock
STUD ASSEMBLY,TURNLOCK FASTENER
Fastening Devices
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMZ | DIAMETER | INCHES NOMINAL 0.302 |
| MATT | MATERIAL | EYELET STEEL COMP 1009 |
| MATT | MATERIAL | PIN STEEL |
| MATT | MATERIAL | STUD STEEL COMP 4037 |
| MATT | MATERIAL | WASHER STEEL OR STEEL COMP 305 OR STEEL COMP 304 OR STEEL COMP 302 |
| SFTT | SURFACE TREATMENT | PIN CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | STUD CADMIUM AND CHROMATE |
| AKCV | DRIVE TYPE | SLOTTED |
| CQYY | STUD HEAD HEIGHT | INCHES NOMINAL 0.092 |
| ADQB | SECURING DEVICE TYPE | WASHER |
| AGRD | TURNLOCK STUD HEAD STYLE | |
| AGRE | STUD ASSEMBLY STYLE | |
| AGRF | DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD | INCHES MINIMUM 0.371 AND INCHES MAXIMUM 0.381 |
| AGRH | EYELET OUTSIDE DIAMETER | INCHES MINIMUM 0.519 AND INCHES MAXIMUM 0.531 |
| AGRJ | STUD DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.130 |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.179 |
| SFTT | SURFACE TREATMENT | WASHER CADMIUM AND CHROMATE AND PASSIVATE |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 28S1-5 | 71286 |
| 28S1-5 | FB011 |
| 28S1-5 | D0680 |
| 10119134 | A486G |
| 100-33226-4 | 18876 |