NSN 5330-00-298-6030 · NIIN 002986030 · FSC 5330
NO DASHES 5330002986030
In Stock
GASKET
Packing and Gasket Materials
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-1149,TY 1 |
| ADUQ | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | INCHES MINIMUM 0.157 AND INCHES MAXIMUM 0.219 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 3.115 AND INCHES MAXIMUM 3.135 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 5.844 AND INCHES MAXIMUM 5.906 |
| ADUE | APERTURE WIDTH | INCHES MINIMUM 4.469 AND INCHES MAXIMUM 4.531 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| ADVM | CROSS-SECTIONAL THICKNESS | INCHES MINIMUM 0.052 AND INCHES MAXIMUM 0.072 |
| STYL | STYLE DESIGNATOR | |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAUB | HOLE DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| CQFM | HARDNESS RATING | OVERALL SHORE DUROMETER A MINIMUM 45.0 AND SHORE DUROMETER A MAXIMUM 55.0 |
| FEAT | SPECIAL FEATURES | TWO 0.250 IN. DIA LOCATOR HOLES |
| ADUF | APERTURE LENGTH | INCHES MINIMUM 5.594 AND INCHES MAXIMUM 5.656 |
| ADUP | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | INCHES MINIMUM 0.157 AND INCHES MAXIMUM 0.219 |
| MATT | MATERIAL | OVERALL RUBBER CHLOROPRENE CLASS CR |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 6.969 AND INCHES MAXIMUM 7.031 |
| AECS | BOLT HOLE QUANTITY | 8 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 3.740 AND INCHES MAXIMUM 3.760 |