NSN 5330-00-364-7907 · NIIN 003647907 · FSC 5330
NO DASHES 5330003647907
In Stock
GASKET
Packing and Gasket Materials
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADPW | OUTSIDE CORNER RADIUS | INCHES NOMINAL 0.250 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 6.500 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 9.000 |
| ABJH | TEMP RATING | FAHRENHEIT -20.0 AND FAHRENHEIT 120.0 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 2.250 |
| ADPQ | INSIDE CORNER RADIUS | INCHES NOMINAL 0.250 |
| MATT | MATERIAL | OVERALL RUBBER BUTADIENE-STYRENE CLASS SBR |
| ADUE | APERTURE WIDTH | INCHES NOMINAL 1.130 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 1.250 |
| ADVM | CROSS-SECTIONAL THICKNESS | INCHES NOMINAL 0.125 |
| AECS | BOLT HOLE QUANTITY | 4 |
| CQFM | HARDNESS RATING | OVERALL SHORE DUROMETER A MINIMUM 40.0 AND SHORE DUROMETER A MAXIMUM 50.0 |
| FEAT | SPECIAL FEATURES | 0.280 IN. DISTANCE FROM EDGE OF GASKET TO CENTER OF BOLT HOLES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-900 |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STYL | STYLE DESIGNATOR | |
| SUPP | SUPPLEMENTARY FEATURES | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ADUF | APERTURE LENGTH | INCHES NOMINAL 8.620 |
| AAUB | HOLE DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 0.400 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C-020-F | 04804 |
| 3365C16H01 | 04804 |