NSN 5330-01-058-7127 · NIIN 010587127 · FSC 5330
NO DASHES 5330010587127
In Stock
GASKET
Packing and Gasket Materials
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAUB | HOLE DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.215 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES MINIMUM 1.621 AND INCHES MAXIMUM 1.649 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.564 AND INCHES MAXIMUM 1.624 |
| ABVL | APERTURE DIAMETER | INCHES MINIMUM 0.659 AND INCHES MAXIMUM 0.679 |
| ADPW | OUTSIDE CORNER RADIUS | INCHES MINIMUM 0.209 AND INCHES MAXIMUM 0.229 |
| ADVC | SIDE RADIUS FROM GASKET CENTER | INCHES MINIMUM 0.620 AND INCHES MAXIMUM 0.630 |
| ADVM | CROSS-SECTIONAL THICKNESS | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.140 |
| ADWF | GAGE RING THICKNESS | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.090 |
| AECS | BOLT HOLE QUANTITY | 4 |
| CQFM | HARDNESS RATING | OVERALL SHORE DUROMETER A NOMINAL 75.0 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY AND RUBBER |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| STYL | STYLE DESIGNATOR |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| J219P03 | 58828 |
| 718115-12 | 83259 |
| J219P03B | 95272 |
| CA-5465-03 | 95272 |
| J219P03 | 95272 |
| 718115-12 | C0308 |
| CA-5465-03 | SW461 |
| J219P03 | 062W0 |
| J219P03 | 07482 |
| J219P03A | 07482 |
Supersedes
This item replaces cancelled NIIN 011985492. An older drawing citing one of those numbers resolves here.