NSN 5330-01-102-1902 · NIIN 011021902 · FSC 5330
NO DASHES 5330011021902
In Stock
GASKET
Packing and Gasket Materials
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAUB | HOLE DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 0.125 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.875 |
| ADUE | APERTURE WIDTH | INCHES NOMINAL 0.625 |
| ADUF | APERTURE LENGTH | INCHES NOMINAL 0.875 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 1.188 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 2.156 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES NOMINAL 0.344 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 0.172 |
| ADVM | CROSS-SECTIONAL THICKNESS | INCHES NOMINAL 0.031 |
| AECS | BOLT HOLE QUANTITY | 4 |
| CQFM | HARDNESS RATING | OVERALL SHORE DUROMETER A MINIMUM 45.0 AND SHORE DUROMETER A MAXIMUM 55.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| MATT | MATERIAL | OVERALL RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-1149,TY 1 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL CONFORMING TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |