NSN 5331-01-661-9132 · NIIN 016619132 · FSC 5331
NO DASHES 5331016619132
In Stock
O-RING
O-Ring
Application: 2350-01-575-0951;2350-01-577-0830
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHE | OUTSIDE DIAMETER | MILLIMETERS NOMINAL 15.98 |
| ADVN | CROSS-SECTIONAL HEIGHT | MILLIMETERS MINIMUM 1.70 AND MILLIMETERS MAXIMUM 1.86 |
| CQFM | HARDNESS RATING | SHORE DUROMETER A NOMINAL 90.0 |
| ADYT | CENTER HOLE DIAMETER | MILLIMETERS MINIMUM 12.29 AND MILLIMETERS MAXIMUM 12.55 |
| MATT | MATERIAL | PLASTIC ACRYLONITRILE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE AST- D2000 OR NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE SAE J200 |
| ABJH | TEMP RATING | CELSIUS -30.0 AND CELSIUS 125.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC 81343-SAE J515 |
| SUPP | SUPPLEMENTARY FEATURES | FOR USE WITH PETROLEUM BASE HYDRAULIC FLUIDS;GENERAL SERVICE USE FOR HIGH-PRESSURE APPLICATIONS OF PNEUMATICS,WATER-BASE HYDRAULIC FLUIDS,LUBRICATING OILS,HYDRAULIC OILS AND GASOLINE;TENSILE STRENGTH IS 10 MPA MINIMUM;LUBRICATION SHOULD BE PERFORMED BY COATING THE ORING WITH THE FLUID USED OR PETROLATUM BEFORE ASSEMBLY TO EASE INSTALLATION |
| AGAV | END ITEM IDENTIFICATION | 2350-01-575-0951;2350-01-577-0830 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| J515CH178X0124H | 81343 |
| J515CH014 | 81343 |
| J515CH178X0124H | 0U583 |
| J515CH014 | 0U583 |
| SAE-J515 | 0U583 |