NSN 6105-00-199-5045 · NIIN 001995045 · FSC 6105
NO DASHES 6105001995045
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.5000 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 1.2500 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0470 |
| AAJT | OVERALL HEIGHT | INCHES 7.000 |
| AAJU | OVERALL LENGTH | INCHES 10.312 |
| AAJV | OVERALL WIDTH | INCHES 6.500 |
| CBBL | FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.1666 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1725.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | ON/OFF SWITCH AND 18 IN. MALE EXTENSION PLUG |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 3.000 |
| BTBY | SHAFT END STYLE | |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWDY | TEMP RATING | OPERATING CELSIUS 55.0 |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | RESILIENT CRADLE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
Supersedes
This item replaces cancelled NIIN 005616321. An older drawing citing one of those numbers resolves here.