NSN 5340-00-069-7575 · NIIN 000697575 · FSC 5340
NO DASHES 5340000697575
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 1.120 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.986 AND INCHES MAXIMUM 0.992 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| STYL | STYLE DESIGNATOR | |
| AKBU | SECOND LEG STYLE | |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.250 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.286 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.062 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.220 |
| AJFQ | SECOND LEG END RADIUS | INCHES NOMINAL 0.250 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.516 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.250 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.062 |