NSN 5340-00-069-7587 · NIIN 000697587 · FSC 5340
NO DASHES 5340000697587
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.344 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.344 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.286 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 4.031 AND INCHES MAXIMUM 4.094 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 2.293 AND INCHES MAXIMUM 2.419 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.711 AND INCHES MAXIMUM 0.774 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| STYL | STYLE DESIGNATOR | |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | STEEL COMP 410 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.344 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.344 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.351 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.344 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 1.632 AND INCHES MAXIMUM 1.695 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.344 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 504264 | 77445 |