NSN 5340-00-075-6052 · NIIN 000756052 · FSC 5340
NO DASHES 5340000756052
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.323 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.323 |
| SFTT | SURFACE TREATMENT | CADMIUM |
| AHLR | SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 4.962 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.279 |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 2.532 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| STYL | STYLE DESIGNATOR | |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE A-S 6350 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6355 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.884 AND INCHES MAXIMUM 0.966 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.293 AND INCHES MAXIMUM 1.333 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 5.568 AND INCHES MAXIMUM 5.608 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| AHQY | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.700 |
| AHQZ | FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 2.200 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 488097 | 31633 |
| 488097 | 77445 |
| 3P50004-187 | 98897 |
| 488097 | 11449 |