NSN 5340-00-078-3619 · NIIN 000783619 · FSC 5340
NO DASHES 5340000783619
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.025 AND INCHES MAXIMUM 0.037 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | CUSHION PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.773 AND INCHES MAXIMUM 0.783 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.555 AND INCHES MAXIMUM 0.565 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM43LC3SS6T | 22175 |
| AS9349-MS9349-05 | 81343 |
| MS9349-05 | 96906 |
| MS9349-05 | D9182 |
| 8016-S-6 | D9182 |
| AS9349-MS9349-05 | 0U583 |
| MS9349-05 | 0U583 |
| SAE-AS9349 | 0U583 |
Supersedes
This item replaces cancelled NIINs 008105949 · 009014147 · 009644310. An older drawing citing one of those numbers resolves here.