NSN 5340-00-081-4718 · NIIN 000814718 · FSC 5340
NO DASHES 5340000814718
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3651 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MATT | MATERIAL | CUSHION PLASTIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| STYL | STYLE DESIGNATOR | |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.519 AND INCHES MAXIMUM 0.539 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.732 AND INCHES MAXIMUM 0.762 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.025 AND INCHES MAXIMUM 0.037 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 014759851. An older drawing citing one of those numbers resolves here.