ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5340-00-084-2846
NSN 5340-00-084-2846  ·  NIIN 000842846  ·  FSC 5340
NO DASHES 5340000842846
In Stock

BRACKET,ANGLE

Hardware, Commercial

Technical characteristics

23 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AHLFSECOND LEG WIDTHINCHES NOMINAL 0.500
ADLKFIRST LEG LENGTHINCHES MINIMUM 0.633 AND INCHES MAXIMUM 0.643
ADLLSECOND LEG LENGTHINCHES MINIMUM 0.725 AND INCHES MAXIMUM 0.735
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTHINCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTHINCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205
AHPWFIRST LEG THICKNESSINCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068
AHPXSECOND LEG THICKNESSINCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068
AHQNFIRST LEG WIDTHINCHES NOMINAL 0.500
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTHINCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTHINCHES MINIMUM 0.225 AND INCHES MAXIMUM 0.235
AJFPFIRST LEG END RADIUSINCHES NOMINAL 0.500
AJFQSECOND LEG END RADIUSINCHES NOMINAL 0.500
AJZUFIRST LEG STYLE
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASSN STD SINGLE MATERIAL RESPONSE A-S 5504
STYLSTYLE DESIGNATOR
MATTMATERIALSTEEL COMP 410
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLEDEGREES NOMINAL 90.0
AKBUSECOND LEG STYLE
AHLKFIRST LEG HOLE DIAMETERINCHES MINIMUM 0.260 AND INCHES MAXIMUM 0.270
AHLNSECOND LEG HOLE DIAMETERINCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210
AKAUFIRST LEG HOLE ARRANGEMENT STYLE
AKCUSECOND LEG HOLE ARRANGEMENT STYLE

Cross-references

3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
MS9601-00596906
MS9601-0050U583
SAE-AS96010U583