NSN 5340-00-106-9059 · NIIN 001069059 · FSC 5340
NO DASHES 5340001069059
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.949 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.281 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.062 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.250 |
| AJFP | FIRST LEG END RADIUS | INCHES NOMINAL 0.250 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 2.206 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.701 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.286 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.644 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.281 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.281 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.062 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 4910 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE |