NSN 5340-00-153-1011 · NIIN 001531011 · FSC 5340
NO DASHES 5340001531011
In Stock
BRACKET,ANGLE
Hardware, Commercial
Application: W/S:ENGINE, AIRCRAFT, TF-33-P-7 (C-141A/B); ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); ENGINE, AIRCRAFT TF-30
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 1.307 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 1.769 AND INCHES MAXIMUM 1.779 |
| AGAV | END ITEM IDENTIFICATION | W/S:ENGINE, AIRCRAFT, TF-33-P-7 (C-141A/B); ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); ENGINE, AIRCRAFT TF-30 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.226 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.286 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.173 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.062 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.062 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.250 |
| AJFP | FIRST LEG END RADIUS | INCHES NOMINAL 0.250 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| STYL | STYLE DESIGNATOR |