NSN 5340-00-168-7103 · NIIN 001687103 · FSC 5340
NO DASHES 5340001687103
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.785 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.768 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.441 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.203 AND INCHES MAXIMUM 0.234 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.286 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.004 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.203 AND INCHES MAXIMUM 0.234 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.203 AND INCHES MAXIMUM 0.234 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | NICKEL ALLOY X-750 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5598 |
| STYL | STYLE DESIGNATOR |