NSN 5340-00-228-3336 · NIIN 002283336 · FSC 5340
NO DASHES 5340002283336
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE A-S 6350 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6355 |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.640 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.312 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.300 |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.640 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.224 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.286 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.312 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 518761 | 77445 |